Fire alarm technician

Screen for the assigned panel, circuit installation, fault diagnosis and device-level test records.

Job description Interview questions Read the hiring guide

Job description

Replace every bracketed field and review the duties before posting.

Fire alarm technician
[Company name] - [City, state / service area]

Job terms
Pay: [range, currency and hourly or annual basis]
Schedule: [days, hours, on-call and overtime expectations]
Employment type: [full-time / part-time / temporary]
Travel: [area, frequency and overnight requirements]
Benefits: [the benefits actually offered]

The work
We are hiring a fire alarm technician to [install / service / inspect and test] [named panel families] in [building types]. Assigned work includes [cabling, devices, circuit checks, panel configuration or test duties]. You will use approved drawings and manufacturer information, coordinate authorized tests and record defects and restoration.

Panels and devices: [name]. Assigned circuits and interfaces: [SLC, NAC, conventional zones / monitoring / door or equipment interfaces]. Required qualifications, reviewer and adopted code edition: [verify for this assignment].

Your responsibilities
- Install and label assigned cable, initiating devices, notification appliances and modules from approved drawings.
- Check circuit identity, device addressing and terminations against the panel and manufacturer requirements.
- Investigate assigned alarm, supervisory and trouble conditions without concealing unresolved faults.
- Coordinate testing and impairment arrangements with the owner, monitoring provider and responsible site team.
- Perform assigned device and interface tests and record observed results, failures and incomplete checks.
- Document repairs, drawing corrections, notifications and restoration before service handover.

Experience we need
- Personal installation, service or inspection/testing experience on the panel families in scope.
- Ability to read circuit drawings and explain initiating, notification and interface responsibilities.
- Experience keeping device-level test records and coordinating occupied-building testing and restoration.
- Required local license, manufacturer authorization or NICET program/level: [state only the verified requirement].

What we provide
[Supervision, training, tools, PPE, software access and other support provided by the employer.]

How to apply
[Application link and any job-related evidence requested.]

Replace every bracketed field, remove duties outside the opening and check the details before posting.

Interview questions

Ask for a comparable project, the person’s own work and the evidence behind the answer.

Download scorecard (PDF)

Describe a device or module installation. What circuit was it on, and how did you verify it?
Listen for: Actual SLC, NAC or zone work, manufacturer-specific wiring, device identity/address, labels and checked drawings.
Tell us about a ground fault, open circuit or recurring trouble you diagnosed.
Listen for: Panel indication and circuit scope, drawings and approved diagnostic checks, isolated cause, repair and verification without bypassing a fault.
How did your last system distinguish alarm, supervisory and trouble events?
Listen for: Specific examples from that panel and the required indications or reporting; these conditions are not interchangeable.
What must be arranged before testing devices or interfaces in an occupied building?
Listen for: Owner and monitoring coordination, authorized impairment/test plan, affected interfaces and occupants, and confirmed restoration.
Show how you record a failed device test and its eventual correction.
Listen for: Device and circuit identity, expected/observed results, deficiency owner, repair/retest evidence and remaining incomplete tests.

Role references

Manufacturer and trade references used to check the duties and interview topics. Select requirements for the actual opening.

Job description

Interview questions

Describe a device or module installation. What circuit was it on, and how did you verify it?

Tell us about a ground fault, open circuit or recurring trouble you diagnosed.

How did your last system distinguish alarm, supervisory and trouble events?

What must be arranged before testing devices or interfaces in an occupied building?

Show how you record a failed device test and its eventual correction.

Role references