Skip to content

Electrical Lab Tech III, 1st Shift

Pentair

Job Description:

Electrical Lab Tech III, 1st Shift - Apex, NC

 

At Pentair, you will work alongside passionate problem-solvers who are committed to the future of our planet. We put our mission into practice, helping the world sustainably move, improve, and enjoy water, life's most essential resource. From our residential water filtration to industrial water management to pool products and more, our 9,000 global employees serve customers in more than 150 countries, working to help create a better world for people and the planet through smart, sustainable water solutions.

 

We have an opportunity for an Electrical Lab Tech III to join our Apex, NC, team within our Pool segment. You will independently develop, and document test procedures based on leadership input.  Represent lab in technical discussions and provide strategic direction and implementation of lab testing for an extensive range of new product types and major product improvements.  You’ll be a part of the new product development team and you will work closely with cross functional partners including product management, operations, marketing, sales and our field testing and service teams.  

 

You will:

  • Assemble, wire, configure, and troubleshoot electrical and electromechanical test setups, fixtures, and prototype assemblies, including soldering, connector installation, wire termination, and prototype rework.
  • Set up and operate oscilloscopes, digital multimeters, power analyzers, programmable power supplies, electronic loads, and data acquisition systems.
  • Perform functional, performance, endurance, and environmental testing on products and components according to approved test plans.
  • Read and interpret electrical schematics, wiring diagrams, assembly drawings, and component specifications, and support engineers with failure investigations and diagnostic testing.
  • Represent the lab in technical discussions and research, source, and train on new laboratory testing equipment.
  • Create, record, maintain, and update test procedures, test parameters, maintenance/calibration records, and change or feedback recommendations.
  • Ensure all laboratory testing and activities comply with applicable safety regulations and industry standards.

 

Key Qualifications:

  • Associate’s degree or technical diploma in Electrical Engineering Technology, Electronics, Industrial Controls, Mechatronics, or a related discipline, with 5+ years of lab experience.
  • Strong knowledge of electrical/electronic circuits, AC/DC power, and electrical measurement techniques, with the ability to independently troubleshoot electrical and electromechanical systems.
  • Proficiency with oscilloscopes, multimeters, power measurement equipment, and data acquisition systems, with strong attention to detail when configuring tests, collecting data, and documenting results.
  • Ability to interpret electrical schematics and wiring diagrams, build test assemblies, wire test fixtures, terminate conductors, assemble connectors, and perform basic soldering/rework.
  • Strong understanding of electrical hazards and safe-work procedures, with the ability to manage multiple test assignments and clearly communicate progress, equipment issues, and test failures.
  • Ability to work independently and collaboratively with engineers and laboratory personnel;
  • Ability to stand, walk, sit, reach, and occasionally lift/move up to 40 pounds in a lab environment that may include moving mechanical equipment and moderate-to-very-loud noise levels.

 

Preferred Qualifications

  • Experience testing motors, variable-speed drives, embedded controls, or other electrically powered consumer/industrial equipment and integrating electrical testing with pressure, flow, temperature, or other performance measurements.
  • Familiarity with PLCs, relays, automated test sequences, computer-controlled instrumentation, and LabVIEW, Python, or similar test automation/data collection tools; knowledge of RS-232, RS-485, or Modbus communication protocols.
  • Experience performing insulation resistance, dielectric withstand, ground continuity, or leakage current testing under approved procedures, including supporting product safety or regulatory compliance testing.

Shift/Hours:

  • 1st Shift: 8:00am – 5:00pm, Monday – Friday

Compensation:

  • The hourly pay for this role is $30.00 – $40.00/hour, DOE. At Pentair, it is not typical for an individual to be hired near the bottom or top of the pay range. Pentair considers several factors in determining actual compensation for this position at the expected location. Actual compensation will be determined by considering level of experience, skills, knowledge, training, pertinent education, including licensure and certifications, and other relevant business or organizational needs.

Benefits:

As part of our comprehensive benefits packages, Pentair provides the following benefits plans and programs to eligible employees:

  • Paid holidays
  • Paid vacation
  • Paid sick time
  • Medical, Dental, and Vision Insurance
  • 401(k)
  • Up to 5% 401K match starting day one of employment
  • Health savings account
  • Life insurance
  • Paid time off
  • Parental leave
  • Caregiver leave
  • Prescription drug insurance
  • Tuition reimbursement



#INDHP

Equal Opportunity Employer

Pentair is an Equal Opportunity Employer. With our expanding global presence, cross-cultural insight and competence are essential for our ongoing success. We believe that a diverse workforce contributes different perspectives and creative ideas that enable us to continue to improve every day.

Work locations

  • Apex, NC, US

Get electrician jobs like this every week

  • One email a week with new jobs within 50 miles of you
  • Matched to your level, apprentice through master
  • Apply with your saved résumé to jobs posted here
Create free account

Already have an account? Sign in

Pentair’s application opened in a new tab. Open it again